Tytanpol® R-003

Grupa Kapitałowa Grupa Azoty

Choose a company

Tytanpol® R-003

PKWiU: 20.12.24.0
CN: 3206

Pigment classification:
R-2 (PN-EN ISO 591-1:2002)
II, VII (ASTM D-476-00)

Grupa Azoty Police

A white fine-milled powder with a rutile crystallographic structure, nontoxic, non-flammable and chemically inactive. Subjected to surface treatment with aluminium and zirconium compounds (3% as Al₂O₃ and 0.35% as ZrO₂) and modified with hydrophilic organic compounds. TYTANPOL^® R-003 has very good optical properties (a high brightening and hiding power, it gives a high gloss to coatings while haze of gloss remains low), is easily dispersible and highly resistant to weather conditions.

ApplicationSee more

TYTANPOL^® R-003 is pigment intended for universal use, and it is especially recommended for high-quality indoor and outdoor paints, both water and solvent borne (industrial, construction, decorative, refurbishing), air-drying enamels, high-solid paints, “coil coatings” and “can coatings” , marine coatings, powder coatings , road marking paints, UV curable paints, wallpapers and paper coatings.

This pigment type can be used effectively for pigmenting plastics (PVC profiles, vinyl panels, plastisols, polyolefines, unsaturated polyesters, polyurethanes, polystyrenes, epoxy plastics, linoleum) and for high-gloss printing inks.

Safety of useSee more

TYTANPOL^® R-003 is safe to transport, use and disposal . The Safety Data Sheet provides detailed information on how to use our pigments safely.

This pigment is suitable for use in products intended for direct contact with food.

Packaging and TransportSee more

TYTANPOL^® R-003 is packed into:

• paper valve bags, 25 kg each,

• flexible bulk containers, the so-called big-bags, 500 kg or 1000 kg each,

• road tankers,

• at the customer’s request, also other packaging, e.g. polyethylene bags or

water soluble paper bags.

TYTANPOL^® R-003 should be transported in covered means of transport, pursuant to the binding regulations, which protect the product against the action of water, precipitation, direct sunlight and damage to the packaging.

The number of layers of bags stacked flat should not exceed twenty-four.

The number of bags stacked flat on the pallet, which varies depending on the pallet dimensions, should not exceed eleven. If the product is transported in units formed on pallets, it is allowed to stack two layers at the most.

The product may also be transported in bulk in means of transport assigned for carrying dusty goods after it has been agreed in writing between the consignee and producer in conditions which guarantee the product quality at least as effectively as the packaging.

TYTANPOL ^® R-003 pigment is not classified as a dangerous substance, further to the UN Orange Book and international transportation codes, e.g. RID (rail transport), ADR (road transport) and IMDG (maritime transport).

If the product is transported in the road means of transport belonging to the consignee or a carrier acting at the direct order of the consignee, the responsibility for any deterioration of the product shall be borne by the customer or the carrier.

StorageSee more

Titanium white should be kept in original undamaged packaging, in clean and dry storage buildings and protected against the influence of weather conditions (solar radiation, precipitation).

The number of layers of bags stacked flat should not exceed twenty-four. If the product is stored in units formed on pallets, it is allowed to stack three pallets at the most.

The pigment may be stored in bulk after it has been agreed in writing between the consignee and producer in conditions which guarantee the product quality at least as effectively as the packaging.

Flexible bulk containers (big-bags), 1000 kg each, are kept one at a time on pallets on high storage racks. It is also allowed to keep two layers of shrinkwrapped flexible bulk containers, 500 kg each, on a pallet on high storage racks.

Tytanpol® - Safety Data Sheet PDF (209.61 KB)

CONTACT WITH SUPPORT

Business Unit Pigments

Sales information

tel.: +48 91 317 38 26
tel.: +48 91 317 12-87
tel.: +48 91 317 43-02
fax: +48 91 317 38 33

##spgxp.zdoadlhzp#at#vgjeppodin.rdb##; ##taoqxtip.bpgrxczxtlxro#at#vgjeppodin.rdb##; ##ydpccp.zgdapz-rwdrwda#at#vgjeppodin.rdb##

Adam Tymejczyk

Tech support

tel.: +48 91 317 34 94
fax: +48 91 317 22 76

##pspb.inbtyronz#at#vgjeppodin.rdb##

return